Bosch Security Escort SE2000 Series Training Manual page 55

Security Escort
3.
4.
5.
Configuration should look as follows in Main Menu, D - Display ProxLink Radio Module
Parameters:
Figure 4.10: ProxLink Radio Module Configuration
Robert Bosch (SEA) Pte Ltd
Put the ProxLink in User Interface Mode by pressing the [CONFIGURATION] button on
the front of the unit. The ProxLink should respond by displaying the Main Menu screen.
Once the Main Menu is displayed, configure a ProxLink parameter by selecting a menu
option and pressing the <Enter> key. This will either display a prompt or a sub-menu.
After finishing with a sub-menu, press the <Esc> key to return to the previous menu.
After you have finished configuring the ProxLink, type <L> <Enter>, then type <Y> to place
the unit in operating mode.
Training Manual
System wiring | en 55
2017.08 | V2.18.1.0 | DOC