Bosch Security Escort SE2000 Series Training Manual page 129

Security Escort
Name
Address
City
State
Zip
Phone
Subscriber ID
Transmitter ID / New ID
Alarm Zone
Alarm Background Color
Female/Male
Height
Build
Hair color
Eye color
Image / [Browse]
Robert Bosch (SEA) Pte Ltd
Troubleshooting transponders, points, receivers, and alert units | en 129
The individual or item assigned to this transmitter. This is a
required field.
Address of this individual or item within the protected area.
The first address line on the left side, which is not the home
address, is shown on the alarm screen.
City of this individual or item within the protected area.
State of this individual or item within the protected area.
Zip code of this individual or item within the protected area.
The phone number to access this individual within the
protected area. The phone number on the left side, which is
not the home phone, is shown on the alarm screen.
The Subscriber ID (typically the Social Security Number) must
be typed into this field. This is a required field. It must be filled
in with a unique ID.
The transmitter identification code can be typed into this field,
but a much faster and error free method is to delete any
existing entry in the Transmitter ID field and then perform a
test with the transmitter to be assigned to this subscriber. The
new Transmitter ID displays in the New ID field. The new
Transmitter ID must be manually entered into the Transmitter
ID field, or use the mouse to highlight the existing Transmitter
ID and press and hold the <Shift> key and press the <Insert>
key. (This transfers the new Transmitter ID to the correct
field.) This is a required field; it must be filled in with a unique
ID. Complete the change to the Subscriber information by
clicking the [Save] button.
Specific alarm zones are assigned to the different computer
workstations of the Security Escort system. Each transmitter
entered in the Subscriber Database can be assigned to one or
more of the alarm zones. You may control on which computer
workstations alarms from this transmitter appear.
Select the desired background color to display for alarm when
this transmitter is activated.
These characteristics are shown on the alarm screen.
Enter the filename for the image of this individual or item to be
shown on the alarm screen. Click the [Browse] button to open
a dialog box to select the filename from a list of available files.
Training Manual 2017.08 | V2.18.1.0 | DOC