80
en | Operation - Playback Mode
7.5
Authenticating Images from Several
Cameras
Recording > Authenticate video menu
The recorded images can be checked for changes. Checks are
carried out on the images of the cameras displayed in the image
area.
1.
2.
3.
4.
7.6
Authenticating a Single Image
Selected image window > Authenticate menu
The image in the selected image window is then checked to see
whether it has been changed. Only the displayed image is
checked.
1.
2.
F.01U.033.372 | V5 | 2009.09
Using the hairline, highlight the time period on the
timeline.
Select the Recording > Authenticate video menu.
The current hairline value in the timeline is copied to the
from and to fields for the start and end time and date. If
you want to change the time period, click the down arrow
beside the from and to fields and select the new date and
time.
Click Start to start authentication.
Select the image window of the camera whose image you
want to check.
Click the Selected image window > Authenticate menu. A
message shows you whether the image has been changed
or not.
Operation Manual
DiBos/DiBos Micro
Bosch Sicherheitssysteme GmbH