Bosch Security Escort SE2000 Series Training Manual page 214

214 en | System menus and dialogs
Incoming Communication Errors This value is the number of messages that the system
Incoming Retried Messages
Total Outgoing Messages
Outgoing Retried Messages
Receiver Buffer Max
Transmit Buffer Max
Buffer Overflow
Hardware Overrun
Total Remote Access
Connections
Total Wrong Access Code
Attempts
Last Remote Access Time
Successful pager messages
Failed pager attempts
[Reset Status]
[Refresh Data]
[Cancel]
2017.08 | V2.18.1.0 | DOC
detected errors in, on this communication port. If displayed
in yellow, this value is more than 1.5% of the Successful
Incoming Messages.
This value is number of successful receptions that indicated
that they retried by the sending application. If displayed in
yellow, this value is more than 1.5% of the Successful
Incoming Messages.
This value is total number of outgoing messages sent on this
port.
This value is number of outgoing messages that were retried
because the receiving application did not acknowledge
them. If displayed in yellow, this value is more than 1.5% of
the Total Outgoing Messages.
This value is maximum number of bytes received on this
serial port, but not yet processed by the system. If displayed
in yellow, more than 50% of the queue was in use.
This value is maximum number of bytes processed by the
system, but not yet transmitted on this serial port. If
displayed in yellow, more than 50% of the queue was in use.
This is the number of times a byte was lost by the software
for a serial port because the input buffer overflowed. Bytes
were placed into the input buffer faster than the system
could process them.
This is the number of times a byte was lost by the hardware
for a serial port because it was not fast enough to process
the byte into the input buffer.
This value is the total number of times a remote access
connection was successful.
This value is the number of times a remote access
connection was attempted and rejected because a valid
remote access code was not received.
This is the time and date of the last successful remote
access attempt.
This value is the number of successful pager messages sent.
This value is the number of times a pager message dial-out
was unsuccessful.
Clicking this button resets all values shown in this dialog.
Clicking this button refreshes all values shown in this dialog.
The values are not automatically updated when the dialog is
left open.
Clicking this button closes the dialog window.
Training Manual
Security Escort
Robert Bosch (SEA) Pte Ltd