206 en | System menus and dialogs
Transponder
[Previous]
[Next]
[Send change]
[Reset to Default]
[Cancel]
8.3.5
Transponder data view
This dialog is solely for engineering evaluation of the transponder only.
Figure 8.20: Transponder Data View Dialog
[RAM point info]
[RAM point stat]
[RAM point trouble]
[RAM EE mstat batt]
[RAM EE buss fault]
[RAM counters]
2017.08 | V2.18.1.0 | DOC
Selects the transponder the data is presented for.
Returns to the previous transponder in the system.
Advances to the next transponder in the system.
Sends the changes made to the selected transponder. Changes are
not made to the transponder EEPROM memory unless this button is
clicked.
Reset the selected transponder to the default settings.
Cancel the operation and close the dialog window.
Views the RAM image of point information.
Views the RAM image of point status.
Views the RAM image of point trouble.
Views the RAM and EEPROM images of transponder status and
battery condition.
Views the RAM and EEPROM images of transponder MUX bus
fault condition.
Views the RAM image of the process registers.
Training Manual
Security Escort
Robert Bosch (SEA) Pte Ltd