Bosch Security Escort SE2000 Series Training Manual page 120

120 en | Troubleshooting transponders, points, receivers, and alert units
Require alarm report
Security alarms silent
Installer alarms silent
Alarm voice output
Show personal data
No receiver icons
Show tests on the map
All Pager Confm Not Reqd
Suppress Lanyard Alarm
Suppress Man Down Alarm If this checkbox is checked, the man down alarm is suppressed
Auto silence alarm in 'X'
seconds
2017.08 | V2.18.1.0 | DOC
If this checkbox is checked, the operator will be prompted to
complete an alarm report when the alarm is reset from the
screen. If the responding officer is required to complete the
report, or if no system report is desired, this box should not be
checked. If the operator should complete the report then check
this box.
If this checkbox is checked, then alarms transmitted by security
or watchman transmitters are to be silent, alerting the operator
at the Central Console, but not sounding the sirens of the alert
units or the horns in the receivers.
If this checkbox is checked, then alarms transmitted by
transmitters issued to installing company representatives and
visitors are to be silent, alerting the operator at the Central
Console, but not sounding the sirens of the alert units or the
horns in the receivers. Typically this checkbox would be checked.
If this checkbox is checked, then predefined sound (.WAV) files
can be played at the alarm console for specific alarm types.
Typically this checkbox would not be checked.
If this checkbox is checked, then personal height, build, hair and
eye color data will be displayed on the alarm screen.
If this checkbox is checked, then individual receiver icons will
not be shown on the alarm map display. Typically this checkbox
would be checked.
If this checkbox is checked, tests from subscriber's transmitter
will be displayed on the normal map screen as OK or FAIL icons,
signifying a successful test by a valid subscriber or an attempted
test transmission from a transmitter not in the Subscriber
Database. This option doesn't affect the display the subscriber
receives from a receiver or alert unit's strobe. Typically this
checkbox would be checked.
If this checkbox is checked, the confirmation pager message is
not sent to the any of the pagers when the alarm is
acknowledged by an acknowledgement transmitter.
If this checkbox is checked, the lanyard alarm is suppressed and
not reported.
and not reported.
This box determines the length of time that the sirens and horns
will sound before being automatically silenced by the Central
Console. When the sounders are automatically silenced in this
way, the Central Console remains in its alarm mode. The
numerical value is in seconds, and it can be set between 0 and
9999. Typically this value would be set to prevent violating local
noise ordinances and it defaults to 240 seconds (4 minutes).
Training Manual
Security Escort
Robert Bosch (SEA) Pte Ltd