IBM Aptiva Handbook page 97

3.
Click on the Mwave Help option.
Moving the I/O address jumpers
If you changed the I/O address in the Windows 95
Device Manager, set the jumpers on the Mwave card to
match that address. These jumpers on the Mwave card
are labeled P4 and P5. To set the I/O address jumpers,
follow these instructions:
1.
Locate the I/O address jumpers on the Mwave card.
2.
Use the following table and picture to determine
how to set the jumpers.
If you choose
Set P4 to:
I/O address:
CE30 Position B
01B0 Position A
0130 Position A
Position A
Jumper
(P4 and P5)
Working with the hardware in the desktop system unit
Set P5 to:
Position B
Position B
Position A
Position B
Jumper
Pin
(P4 and P5)
83