IBM Aptiva Handbook page 106

Installing a drive in bay 1 (continued)
3.
Left bracket replacement
Insert the left bracket catches into the slots and
slide the bracket forward until it locks into place.
Align the screw holes and insert the screws.
Left Bracket
Drive
(Front View)
92 Chapter 7: Adding and removing adapter cards and drives
Catch
4.
Drive cable connection
Connect all drive cables.
Power Cable
(Back View)
If you are adding a diskette or tape drive that attaches
to the Diskette connector, make sure the signal cable
you plug into the drive is attached to the Diskette
note:
connector on the system board. To identify the
Diskette connector, see "Identifying signal cable
connectors" on page 87.
Drive
Signal Cable