IBM Aptiva Handbook page 108

Installing a drive in bay 2 (continued)
3.
Drive cable connections
Connect all drive cables.
Drive
Audio Cable
Signal Cable
(Back View)
If you are adding a diskette or tape drive that attaches
to the Diskette connector, make sure the signal cable
you plug into the drive is attached to the Diskette
note:
connector on the system board. To identify the
Diskette connector, see "Identifying signal cable
connectors" on page 87.
94 Chapter 7: Adding and removing adapter cards and drives
4.
Power Cable
Left bracket replacement and drive cable
connections
For instructions on replacing the left bracket and
connecting the drive cables for any drive that may
be attached to the left bracket, see page 92.