Changing And Restoring Settings; Restoring Factory Settings - IBM Aptiva Handbook

Keys Function
F1 Press this key if you want help for a selected menu
option.
F2 Press this key if you want general information on
using the Setup Utility.
F5 Press this key if you want to return the Setup
Utility settings to the factory defaults (the original
settings that were installed at the factory).
Esc After viewing or making changes to the settings
on a menu, press this key to exit the menu.
Enter Press this key to choose a highlighted option from
a menu.
Not all of these keys are available on every menu.
note: The keys that are available on each menu are
displayed at the bottom of the menu.

Changing and restoring settings

In Setup Utility menus, the configuration information
you can change is enclosed in brackets like these: [ ].
You cannot change information that is not surrounded
by brackets.
When you make a change, the
(*) appears next to the changed option. If you return the
changed option to its original setting, the symbol
disappears.
When you complete your changes or finish viewing
information, return to the Main Menu. From this
location, you can exit the Setup Utility and save your
changes or exit without saving your changes.
32 Chapter 4: Viewing and changing Aptiva configuration
symbol or an asterisk
To exit the Setup Utility, follow these steps:
1.
From the Main Menu, press the Esc key.
2.
The Exit Setup Utility menu appears. If you have
made changes in the Setup Utility, it will contain an
option for saving your changes.
•
If you would like to save your changes, highlight
the option to save your changes and exit the
Setup Utility, then press Enter.
•
If you do not want to save your changes,
highlight the option to exit the Setup Utility
without saving, then press Enter.

Restoring factory settings

When you purchase an Aptiva computer, it is already
configured for use. The Setup Utility stores these
original configuration settings, called factory settings,
so that you can return to the original configuration at
any time. If you have made changes in the Setup Utility
and you would like to restore the factory settings, follow
these steps:
1.
From the Main Menu, press the F5 key.
The Load System Settings menu appears.
2.
Highlight the option to reload the factory settings,
then press Enter.
3.
Exit from the Setup Utility and save your changes.