Pneumatic Connections; Figure 4-3: Pneumatic Connections, Rack Mount Configuration - Teledyne 465M User Manual

5. Turn on the 465M by switching the switch on the left side of the rear panel, or
applying power to the monitor (NEMA configuration.) The front panel display
should light with a sequence of messages, including the instrument serial number and
software revision. (When the instrument first powers up, the display will show
'xxxx', indicating that the instrument is in start-up mode, waiting for the UV detector
readings to stabilize).
After the start-up period, the instrument will begin displaying the ozone concentration
and the optional stream selector will begin operating, if installed.
4.4.

Pneumatic Connections

Figure 4-3: Pneumatic Connections, Rack Mount Configuration

06160J DCN7969 Teledyne API Model 465M O Monitor User Manual
3
19