Teledyne 465M User Manual page 28

4.5.5.2. RS485 Connection
With the instrument configured for RS485, connection can be made to the DB-9
connector, labeled "RS232/485", or to the three "COM" pins on the "General I/O"
connector. See Section 8.2 for additional details.
4.5.5.3. Ethernet Connection
With the instrument configured for Ethernet, connection should be made to the RJ-45
port labeled "Ethernet." Connection can be made using a standard Category 5 or better
network patch cable. TAPI can provide an appropriate cable, please see the spare parts list
in Appendix A. See Section 8.2 for additional details.
26 Teledyne API Model 465M O Monitor User Manual 06160J DCN7969
3