Table of Contents
Advertisement
6. OPTIONS
6.1.
Rack Mount Slides
Rack mount slides can be attached to the sides of the Rack Mount version of the 465M,
allowing it to slide completely out of a RETMA rack, facilitating maintenance activities.
6.2.
Low Flow Alarm
The 465M can be fitted with an internal electronic flow-switch that enables the
instrument to detect gas flow and provide a Pneumatic Error if the flow is outside it's
normal limits.
6.3.
No Sample Conditioner
When this option is elected where the sample conditioner has been removed, the Model
465M should not be operated in environments where sample gas is saturated with water
vapor or liquid; the recommended humidity level is < 90% RH.
Referring to the Instrument Layout illustration in the 465M user manual, part number
06160, note that the components labeled "DRYER" and "COALESCING FILTER
ASSEMBLY" are removed from the instrument.
The following diagram shows the pneumatic path without the sample conditioner:
Figure 6-1: Pneumatic Diagram with Sample Conditioner Removed
06160J DCN7969
Teledyne API Model 465M O
Monitor User Manual
3
29
Advertisement
Table of Contents
