Table of Contents
Advertisement
11. CALIBRATION
WARNING: Electrical Shock Hazard
THE OPERATIONS OUTLINED IN THIS CHAPTER ARE TO BE
PERFORMED BY QUALIFIED MAINTENANCE PERSONNEL ONLY!
11.1.
Factory Calibration
The 465M is calibrated to internal TAPI calibration standards prior to shipment. A
calibration certificate for your instrument can be purchased from Teledyne API if
required. Teledyne API also recommends that the 465M be re-calibrated once a year.
Teledyne API can provide NIST traceable calibration services at our factory or on-site.
Please contact Technical Support for details on these services (see Section 12).
06160J DCN7969
Teledyne API Model 465M O
Monitor User Manual
69
3
Advertisement
Table of Contents
