Figure 4-1: 465M Mounting Hole Locations and Dimensions
4.2.
Mechanical Installation (19" Rack Version)
The Rack Mount version of the 465M was designed to be operated as a bench-top
monitor or to be mounted in a standard 19" RETMA instrumentation rack. For rack
installations, the four mounting feet should be removed from the bottom of the monitor.
4.2.1.
Ventilation Clearance
When installing the 465M be sure to leave sufficient ventilation clearance.
Table 4-2: 465M Ventilation Clearances, Rack Mount Version
Area
Back of the monitor
Sides of the monitor
Above and below the monitor
16
Teledyne API Model 465M O
Minimum required clearance
3 inches
1 inch
1/2 inch
Monitor User Manual
3
06160J DCN7969