Figure 8-1: Com Configuration Jumper Settings (Sw2) - Teledyne 465M User Manual

6. For RS-232 operation, set SW2 to either DTE or DCE (See Section 8.3) For RS-
485 operation, set SW2 to DCE.
7. Re-install the instrument cover.
8. Re-connect power to the instrument.
9. The software portion of the COM port configuration will now automatically be
completed after the next instrument boot-up.
SW3
SW3
SW3

Figure 8-1: Com Configuration Jumper Settings (SW2)

44 Teledyne API Model 465M O
3 5 6 7 8 9 10
1 2 4
ETHERNET RS485 RS232
Close Indicated Positions Only
1 2 3 4 5 6 7 8 9 10
ETHERNET RS485 RS232
Close Indicated Positions Only
1 2 3 4 5 6 7 8 9 10
ETHERNET RS485 RS232
Close Indicated Positions Only
Monitor User Manual
3
RS232 Configuration
RS485 Configuration
Ethernet Configuration
06160J DCN7969