Teledyne 465M User Manual page 64

3. When the upload is complete, a message, "Verify-flash completed successfully"
should be displayed. If it is an unsuccessful upload, a message "Verify-flash
error" is displayed. If a Verify-flash error occurs, ensure that the correct PC COM
port is selected for the instrument (see Section 9.10.2, step 4).
A verification process can be stopped at any point in time. This will
not affect the firmware that is already uploaded on the instrument.
The instrument will automatically go to the firmware in 10 seconds.
62 Teledyne API Model 465M O
NOTE
Monitor User Manual
3
06160J DCN7969