Table of Contents
Advertisement
4.5.
Electrical I/O Connections
4.5.1.
Location of I/O Connectors in the NEMA
Configuration
In the NEMA configuration of the 465M, the I/O connectors are located internally in the
instrument. See Figure 4-6 for their location. Connection to these terminals is usually
made via a conduit connection to the NEMA enclosure. A standard conduit penetration
may be added to one of the walls of the enclosure for this purpose, or the existing
penetration may be used.
The I/O label inside the NEMA cover provides information on the functions of the
connectors. See Figure 4-7 below for the location of the I/O Label.
Figure 4-7: NEMA I/O Label
06160J DCN7969
Teledyne API Model 465M O
Monitor User Manual
23
3
Advertisement
Table of Contents
