Table of Contents
Advertisement
4. GETTING STARTED
The 465M is shipped with the following standard equipment:
1. Power cord (Rack mount version only)
2. Instruction manual.
Upon receiving the 465M please do the following:
1. Verify that there is no apparent shipping damage. (If damage has occurred
please advise shipper first, then Teledyne API.)
4.1.
Mechanical Installation (for NEMA 4X
Enclosure)
Mount the enclosure securely to a vertical surface.
•
Figure 4-1
shows the locations of the four mounting holes, which are 0.32"
(8.128 mm) diameter.
• All four mounting holes should be used to secure the monitor.
• Use stainless steel, 5/16" (8 mm) diameter bolts.
4.1.1.
Ventilation Clearance
When installing the 465M be sure to leave sufficient ventilation clearance.
Table 4-1: 465M Ventilation Clearances, NEMA Version
Area
Back of the monitor
Sides of the monitor
Above and below the monitor
06160J DCN7969
Minimum required clearance
None
1 inch
1 inch
Teledyne API Model 465M O
Monitor User Manual
3
15
Advertisement
Table of Contents
