Table of Contents
Advertisement
• Library mode (LUN0 and LUN1) that supports open/close/read/write plus media mover commands such
as read element status and move media.
The 3592 library must be in Random 2 LUN mode. Also, the other devices must be in Random mode, both
when booted and to operate NTUTIL in library mode.
Base mode (only LUN 0 is accessed) is shown in Figure 90 on page 276.
Library mode (LUN 0 and LUN 1 are accessed) is shown in Figure 91 on page 277.
Base mode
The Base mode menu follows:
MANUAL TEST MENU:
+----------------------------------------------------------------+
| 1: set device special file
| 3: set block size R/W (now !0 fixed)
| 5: set return error when fail
| 7: set exit on unexpected result
+----------------------------------------------------------------+
|20: open
|22: read
|24: read and display block
|26: read block id
|28: locate block id
+----------------------------------------------------------------+
|30: write filemark(s)
|32: forward space filemark(s)
|34: reverse space filemark(s)
|36: forward space record(s)
|38: reverse space record(s)
|43: set media parms (block size)
|46: get device information
|48: get medium information
|53: space EOD
+----------------------------------------------------------------+
|70: system command
|
+----------------------------------------------------------------+
|80: Force Dump
|82: Update Code
|84: Get Last Sense
|86: Associative/Persistant WProtect
|88: List Registered Devices
+----------------------------------------------------------------+
|99: return to main menu
|
+----------------------------------------------------------------+
enter selection:
Figure 90: Base mode: Windows environment
Library mode
The Library mode menu follows:
276 IBM 3592 TS1140, TS1150, TS1155, and TS1160 Tape Drives: Maintenance Information
2: display symbols
4: set block count (R/W)|
6: set/reset trace
8: Library Mode
21: close
23: write
25: flush (buffer->media)|
27: erase
29: display block data
31: rewind
33: unload
35: load
37: return error
39: test unit ready
44: set dev parms (comp. |
47: restore data
49: inquiry
54: display message
81: Read Dump
83: Log Sense
85: Get Version
87: Read/Write Test
89: Get MTDevice info
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Advertisement
Table of Contents
