Set Port 0 {Or 1} Name Menu; Set Node 0 {Or 1} Name Menu - IBM 3592 Maintenance Information

Set Port 0 {or 1} Name menu

Table 96 on page 131 shows the Set Port 0 Name and the Set Port 1 Name menu items. This menu
allows the drive to set the Port 0 Name and the drive Port 1 Name.
Table 96: Set Port 0 {or 1} Name menu
Function
Cancel
5
0
0
5
...
Save and Continue
Note: If you alter any name, you must save or alter all the names. For example, if you alter the Port Name
only, you must at least save Port 0 and Port 1.
Cancel
Causes the "Fibre Options menu (CE Offline Mode)" on page 129 to display.
0123456789ABCDEF
Selecting this option increments the hexadecimal character. The number wraps from 'F' to '0'.
Save and Continue
Causes "CE Save Data menu (Root, Port, and Node names)" on page 132 menu to display to allow or
disallow saving data in DRAM.

Set Node 0 {or 1} Name menu

Table 97 on page 131 shows the Set Node 0 Name and the Set Node 1 Name menu items. This menu
allows the drive to set Node 0 Name and the Node 1 Name.
Table 97: Set Node 0 {or 1} Name menu
Function
Cancel
5
0
0
5
...
Save and Continue
Note: If you alter any name, you must save or alter all the names. For example, if you alter the Node
Name only, you must at least save Node 0 and Node 1.
Cancel
Causes the "Fibre Options menu (CE Offline Mode)" on page 129 to display.
Next menu
"Fibre Options menu (CE Offline Mode)" on page 129
-
-
-
-
-
"CE Save Data menu (Root, Port, and Node names)" on page 132
Next menu
"Fibre Options menu (CE Offline Mode)" on page 129
-
-
-
-
-
"CE Save Data menu (Root, Port, and Node names)" on page 132
Virtual Operator panel 131