IBM 3592 Maintenance Information page 159

Table 107: CE Utilities menu (continued)
Function
Engr Use Only...
OEM Use Only...
Cancel
Causes the "CE Options menu" on page 107 to display.
Calibrate Drive
Allows the CE to calibrate the drive read/write channel to optimum settings for the tape cartridge that
currently is loaded.
Disp Sensors...
Causes the "CE Disp Sensors menu (CE Online Mode)" on page 154 to display, which allows the CE to
exercise sensors in the device and observe feedback from the operation.
Disp/Alt VPD...
Allows the CE to display or change the vital product data (VPD). Changing the VPD must be done only
with assistance from support personnel.
Microcode Trap...
Allows the CE to set a specific FSC trap (error microcode match) in microcode to force a microcode
dump.
Read Tape...
Allows the CE to display a portion of the data on the tape cartridge.
Show Statistics...
Allow the CE to display internal counts of activities.
Engr Use Only...
Password required. Allows support personnel to access selected utilities.
OEM Use Only...
Password required. Allows OEM support personnel to customize VPD data.
CE Disp/Alt VPD menu
Note: Use this only when directed by your next level of support.
Table 108 on page 139 shows the CE Disp/Alt VPD menu items. This menu allows the CE to select the
vital product data (VPD) group that contains the specific VPD field to be displayed or altered. You can
display all the contents in each of the groups, but can alter some of the contents in only the flash group.
Table 108: CE Disp/Alt VPD menu
Function
Cancel
CE Ucode Grp
CE DRAM Grp
CE Flash Grp
Note:
1. Supplemental Message Line 1: Select VPD field
2. Supplemental Message Line 2: <none>
Cancel
Causes the "CE Utilities menu" on page 138 to display.
Next menu
"Enter Password menu" on page 144
"Enter Password menu" on page 144
Next menu
"CE Utilities menu" on page 138
CE Ucode Grp menu (not shown)
CE DRAM Grp menu (not shown)
CE Flash Grp menu (not shown)
Virtual Operator panel 139