Ce Action Successful Display; Ce Action Failed Display; Test Fibre Wrap Menu - IBM 3592 Maintenance Information

the service panel. Go to "FID entry point" on page 6, and use the FID that displayed to analyze the
condition.
The CE Action menus, Figure 50 on page 111 and Figure 51 on page 111, display the result of a
completed action.
CE ACTION SUCCESSFUL
BACK TO CE MENUS
UNLOAD DRIVE
RESET DRIVE...
Figure 50: CE Action Successful display
CE ACTION FAILED
BACK TO CE MENUS
UNLOAD DRIVE
RESET DRIVE...
Figure 51: CE Action Failed display
CE Loop Diag menu
Table 69 on page 111 shows the CE Loop Diag menu items. This menu allows the CE to select tests to run
in loop mode. A looptest runs until you stop that test.
Table 69: CE Loop Diag menu
Function
Cancel
POST
Read/Write
Read/Write (Short)
Panel
Test Wrap
Test Frame Wrap
– Unplug From Silo –
Compliance
Compactor Diag
Test Fibre Wrap
Note:
1. Supplemental Message Line 1: Please be patient
2. Supplemental Message Line 2: when stopping diag.
Cancel
Causes the CE Verify Fix/Diag menu to display.
Next menu
"CE Verify Fix/Diag menu" on page 108
"Status menus" on page 109
"Status menus" on page 109
"Status menus" on page 109
"Status menus" on page 109
"Status menus" on page 109
"Status menus" on page 109
–
–
"Test Fibre Wrap menu" on page 112
Virtual Operator panel 111