Operator Bezel - Drive Canister Front View - IBM 3592 Maintenance Information

Figure 2: Operator bezel - drive canister front view. Use with reference numbers in Table 14 on page 29.
Table 14: Operator bezel functional areas. Use with Reference Numbers in Figure 2 on page 29.
Reference Item
number
1 Chevron fiducial
2 Tape cartridge slot
3 Unload
4 Reset
5 LED power indicator
6 Eight-character (message)
display
Operator panel (8-character display) message types
The 3592 operator panel message display has various message types -
• FID messages
2
4
6 5
More information
Used by library accessor
Area where tape cartridge is loaded
Press Unload to manually unload a tape cartridge
Note: If you press Unload while a tape cartridge is
loaded, the drive completes any operation in
progress, then rewinds and unloads the tape
cartridge.
Press Reset to generate a drive reset
Note: This action stops tape motion before a reset is
completed. Reset is recessed to prevent accidental
activation. Use a pointed object like a pencil to press
Reset.
Green LED indicates that power is applied. This LED
becomes yellow during activities like a microcode
load.
Information area for operator. The CE does not use
this display for normal maintenance. This display
provides FID messages, attention drive messages,
clean messages, and drive status.
Note: For information, refer to the 3592 Operator
Guide.
1
3
Introduction 29