Set Root Name Menu (Ce Offline Mode) - IBM 3592 Maintenance Information

Table 94: Port/Node Names menu (CE Offline Mode)
Function
Port Names/WWID
0=5005076302400143
1=5005076302800143
Node Names/WWID
0=5005076302000143
1=5005076302C00143
Cancel
Causes the "Fibre Options menu (Services menu)" on page 100 to display.
Port 0 / Port 1 Name
Both Fibre port 0 and Fibre port 1 names are displayed.
Node 0 / Node 1 Name
Both Fibre node 0 and Fibre node 1 names are displayed.
Set Root Name menu
Table 95 on page 130 shows the Set Root Name menu items. This menu allows the drive Root name to be
set.
Table 95: Set Root Name menu (CE Offline Mode)
Function
Cancel
5
0
0
5
...
Save and Continue
Note:
1. Supplemental Message Line 1: Port0 ID=aa bb cd
2. Supplemental Message Line 2: Port1 ID=aa bb cd
Note: If you alter any name, you must save or alter all the names. For example, if you alter the Node
Name only, at minimum, you must save Port 0 and Port 1.
Cancel
Causes the "Fibre Options menu (Services menu)" on page 100 to display.
0123456789ABCDEF
Selecting this option increments the hexadecimal character. The number wraps from 'F' to '0'.
Save and Continue
Causes "CE Save Data menu (Root, Port, and Node names)" on page 132 menu to display to allow or
disallow saving data in DRAM.
130 IBM 3592 TS1140, TS1150, TS1155, and TS1160 Tape Drives: Maintenance Information
Next menu
"Fibre Options menu (CE Offline Mode)" on page 129
"Fibre Options menu (CE Offline Mode)" on page 129
Next menu
"Fibre Options menu (Services menu)" on page 100
-
-
-
-
-
"CE Save Data menu (Root, Port, and Node names)" on page 132