Tools; Installing The Rack Mount Kit - IBM 3592 Maintenance Information

Table 138: Installation Instruction feature codes and RPQs (continued)
Description
Attached to Windows
System
Attached to Other Non-
IBM
Attached to Linux
System
Attached to i5/OS or
OS/400 System
Attached to AIX System 3592

Tools

One set of tools is often shipped with a frame or rack shelf feature code. The tools can be contained in a
ship group. See Chapter 9, "Parts catalog information," on page 259 for part numbers. See "Special tools
and customer supplies" on page 35 for information.
• CE scratch tape - It is not to be given to the customer for their use. This item, which is occasionally
referred to as a diagnostic cartridge, is also available as a FRU. The EH7 and later drives use a JK type
cartridge as a CE scratch tape.
• Cleaning cartridge - Use to clean the tape path. See "Cleaning cartridge" on page 36.
• Microcode CD - Contains the EC level of the microcode that is shipped with the drive canister. The part
number changes with each EC release of the microcode.
• Fibre wrap tools - Use to test the connection at the drive and the end of the fibre cable. See "Fibre wrap
tool" on page 38.
• Ethernet patch cable for laptop - Used for all service functions in this configuration.

Installing the Rack Mount Kit

Follow the steps to complete the installation of the Rack Mount Kit. Refer to Figure 55 on page 170.
Machine type
3592
3592
3592
3592
Model
EH7, EH8, 55F, 60F
EH7, EH8, 55F, 60F
EH7, EH8, 55F, 60F
EH7, EH8, 55F, 60F
EH7, EH8, 55F, 60F
Feature code
9212
9213
9215
9400
9600
Installation 169