Offloading Dumps To Solaris System With Tapeutil - IBM 3592 Maintenance Information

Hit <enter> to continue...
-------------------- General Commands: ----------------------------
1. Open a Device
2. Close a Device
3. Inquiry
4. Test Unit Ready
5. Reserve Device
6. Release Device
Q. Quit IBMtapeutil
------------------- Medium Changer Commands: ----------------------
60. Element Information
61. Position To Element
62. Element Inventory
63. Exchange Medium
64. Move Medium
-------------------- Service Aid Commands: ------------------------
70. Dump Device
71. Force Dump
-------------------------------------------------------------------
99. Back To Main Menu
Enter Selection: :
6. Enter 1 (Open a Device).
7. Enter /dev/IBMtape0 when prompted for the device name.
8. Enter 1 (Read/Write) (not shown).
-------------------- General Commands: ---------------------------
1. Open a Device
2. Close a Device
3. Inquiry
4. Test Unit Ready
5. Reserve Device
6. Release Device
Q. Quit IBMtapeutil
--------------------- Tape Commands: ------------------------------
20. Rewind
21. Forward Space Filemarks
22. Backward Space Filemarks
23. Forward Space Records
24. Backward Space Records
25. FSFM
26. BSFM
27. Space to End of Data
28. Read and Write Tests
29. Write Filemarks
30. Read or Write Files
31. Erase
32. Reset Drive
--------------------- IBMtape Commands: ---------------------------
46. Query Sense
47. Query Inquiry
48. Query/Set Tape Parameters
49. Query/Set Tape Position
50. Query/Set MT/ST Mode
51. Report Density Support
--------------------- Service Aid Commands: -----------------------
70. Dump Device
71. Force Dump
-------------------------------------------------------------------
99. Back To Main Menu
Enter Selection:
9. Select 70 (Dump Device).
10. Specify the file name from which the dump is to be read, then press Enter.
11. Enter Q. to quit the program.

Offloading dumps to Solaris system with TAPEUTIL

Refer to the IBM SCSI Tape Drive, Medium Changer, and Library Device Drivers: Installation and User's
Guide for details of the ITDT/tapeutil program with Solaris systems.
214 IBM 3592 TS1140, TS1150, TS1155, and TS1160 Tape Drives: Maintenance Information
7. Request Sense
8. Log Sense Page
9. Mode Sense Page
10. Switch Tape/Changer Device
11. Create Special Files
12. Query Driver Version
65. Load/Unload Medium
66. Initialize Element Status
67. Prevent/Allow Medium Removal
68. Initialize Element Status Range
69. Read Device Identifiers
72. Load Ucode
73. Reset Drive
7. Request Sense
8. Log Sense Page
9. Mode Sense Page
10. Switch Tape/Changer Device
11. Create Special Files
12. Query Driver Version
33. Set Block Size
34. Retension Tape
35. Query/Set Tape Position
36. Query Tape Status
37. Load Tape
38. Unload Tape
39. Lock Tape Drive Door
40. Unlock Tape Drive Door
41. Take Tape Offline
42. Enable/Disable Compression
43. Flush Driver's Buffer
44. Self Test
45. Display Message
52. Locate Tape Position
53. Read Tape Position
54. Query Mtdevice Number
55. Synchronize Buffers
56. List Tape Filemarks
72. Load Ucode
73. Reset Drive