System I (As/400) Product Activity Log (Display) - IBM 3592 Maintenance Information

Here is what the sense data would look like in the AS/400
Product Activity log for a model Jxx.
shown as 63A0 instead of 3592 since 63A0 is the reported type.
----------------------------------------------------------------------
Display Additional Information for Resource
Name Type
TAPMLB46 63A0
SENSE DATA FOLLOWS. . . . :
DATA OFFSET
000000
000010
000020
000030
000040
Press Enter to continue.
F3=Exit F12=Cancel
OFFSET HEX
000002 03
000007 X'0A' or X'58"
00000C 3001
00000E FF
000010 3A9F
000021 333D
000048 36434220 20202000
Figure 27: System i (AS/400) Product Activity Log (display)
For information about the sense bytes, see Request Sense X'03' in the IBM Tape System 3592 Hardware
Reference.
Figure 28 on page 68 provides an example of an System i hexadecimal error report printout with an error
type of Permanent.
The device type is
Serial
Model Number
001 13-10016
0 1 2 3 4 5 6 7
F0000300 00005058 00000000 3001FF02
3A9F1000 02030191 00091040 00000800
00333D00 00000000 00000000 00000000
00000000 00000000 00000000 00000000
00000000 49000000 36434220 20202000
ASCII DESCRIPTION
Sense key of 3
18 bytes or 96 bytes of sense data are returned
ASC and ASCQ
FID (FRU identification number)
1st error code
2nd error code
Microcode EC Number (in ASCII)
Resource
Name
TAP04
8 9 A B C D E F
Messages 67