IBM 3592 Maintenance Information page 38

Table 6: Supported TapeAlert flags. The No. column is presented in decimal format, not hexadecimal format.
(continued)
No. Flag Description
Note:
1. Look for a displayed FID or ATTN message, or an entry in the drive error log. See "CE Error Log menu" on
page 134, or run diagnostic tests. Go to "Maintenance starting point" on page 1.
2. The broken tape can be caused by another drive nicking or otherwise damaging the tape before it was
placed in the current drive.
18 IBM 3592 TS1140, TS1150, TS1155, and TS1160 Tape Drives: Maintenance Information
Customer action CE action