Display Memory Menu - IBM 3592 Maintenance Information

Table 124 on page 149 shows the CE Select Address menu items. This menu allows the CE to select an
address in control store. The byte is read from the selected address. The message line indicates that the
Control Store option was selected on the previous screen.
Table 124: CE Select Address menu
Function
Cancel
CS Adr (8 characters that are
displayed vertically)
Continue...
Note:
1. Supplemental Message Line 1: Control store
2. Supplemental Message Line 2: <none>
Cancel
Causes the "CE Utilities menu" on page 138 or "CE Engr Use Only menu" on page 145 to display.
<CS Adr>
Defines the address to be chosen. To change the value of the nibble, select the nibble, which causes a
new menu to display where you can select '0 - F'.
Continue...
Uses the address that is displayed and goes to "Display Memory menu" on page 149 or "CE Display/
Alter menu" on page 150.

Display Memory menu

Note: Use this only when directed by your next level of support.
Table 125 on page 149 shows the Display Memory menu items. This menu allows the CE to display the
byte in the specified address. The message line indicates the current control store address and value.
Table 125: Display Memory menu
Function
Cancel
Scroll Up
<CS ADR+0)> <CS Data>
<CS ADR+4)> <CS Data>
<CS ADR+8)> <CS Data>
<CS ADR+...0)> <CS Data>
Scroll Down
Note:
1. Supplemental Message Line 1: SC Adrs: <CS Adrs>
2. Supplemental Message Line 2: SC Value: <CS Data>
Next menu
"CE Utilities menu" on page 138 or "CE Engr Use Only menu" on page
145
-
"Display Memory menu" on page 149 or "CE Display/Alter menu" on
page 150
Next menu
"CE Utilities menu" on page 138
-
-
-
-
-
-
Virtual Operator panel 149