Configuring Safety Functions On The Drive - Siemens SIMATIC S7-300 Getting Started
Automation system, cpu 317tf-3pn/dp: controlling a sinamics s120 with safety functions
Hide thumbs
Also See for SIMATIC S7-300:
- Manual (676 pages) ,
- Reference manual (574 pages) ,
- Installation and operating manual (356 pages)
Table of Contents
Advertisement
4.12
Configuring safety functions on the drive
Requirement
S7T Config is in online mode.
Procedure
Step
Activity
1
In the project navigator, select SIMATIC 300(1) > Technology > S120_CU320_2_DP > Drives > Servo_02 >
Functions > Safety Integrated.
Click "Change settings" in the "Safety Integrated" dialog.
2
Select "Extended functions via PROFISafe" in the "Safety function selection" drop-down list.
3
In the "Safety functions" drop-down list, select the item "Enable".
Click "Configuration".
CPU 317TF-3PN/DP: Controlling a SINAMICS S120 with Safety Functions
Getting Started, 10/2013, A5E02982990-04
4.12 Configuring safety functions on the drive
Configuration
69
Advertisement
Table of Contents
