Introduction - Siemens SIMATIC S7-300 Getting Started

Introduction

These instructions provide a practical example guiding you through the commissioning tasks
required to create a fully functional application, and showing you how to perform a traverse
motion with additional safety functions. It will help you get acquainted with operating the
CPU 317TF-3PN/DP and the SINAMICS S120 drive system.
Depending on your level of expertise, working through the sample will take between 4 and 5
hours.
Validity
The manual is valid for the following components:
● CPU 317TF-3PN/DP as of V3.2.9/4.1.5
● SINAMICS S120 as of V4.4
● S7 Technology as of V4.2 SP3
● S7 Distributed Safety as of V5.4 SP5 and S7 F Configuration Pack as of V5.5 SP10
Requirementss
This document presumes that you have connected a SINAMICS S120 drive system to the
DP(DRIVE) interface of the CPU 317TF-3PN/DP.
We recommend the following manuals as preparation:
● Getting Started "CPU 317T-3PN/DP: Controlling a SINAMICS S120"
● Getting Started "S7 Distributed Safety"
● System manual "Safety Engineering in SIMATIC S7"
CPU 317TF-3PN/DP: Controlling a SINAMICS S120 with Safety Functions
Getting Started, 10/2013, A5E02982990-04
1
5