Wiring - Siemens SIMATIC S7-300 Getting Started

Wiring

Live wires
You may come into contact with live wires. Always switch off power before you start wiring
the S7-300.
Procedure
An analog description of the installation and wiring of your CPU 317TF-3PN/DP is found in
the
(http://support.automation.siemens.com/WW/view/en/15390497).
Setting the PROFIBUS address on the CU320-2DP
Set the PROFIBUS address of the SINAMICS to PROFIBUS address 4. You set the
PROFIBUS address on the CU320-2DP directly on the lower rotary coding switch (L).
CPU 317TF-3PN/DP: Controlling a SINAMICS S120 with Safety Functions
Getting Started, 10/2013, A5E02982990-04
WARNING
Getting Started Collection S7-300 PLC: CPU 31x: Commissioning
3
in the Internet
15