Programming; Creating Technology Data Blocks - Siemens SIMATIC S7-300 Getting Started

Programming

5.1

Creating technology data blocks

Procedure
Step Activity
1 Change to "Technology Objects Management". Confirm the first message box with "OK", and the second
with "Yes".
If you are not running the "Technological Objects Management" application yet, you can open it by double-
clicking "Technological Objects" in the "Technology" folder in SIMATIC Manager (see also the step:
"Configuring the axes with S7T Config").
Result: The "Technological Objects Management" opens.
Edit the DB numbers as shown in the figure in order to adapt these for use in our example.
2 Create the technology DBs listed below by clicking "Create":
Axis_1
•
Axis_2 (if this exists)
•
Trace
•
MCDevice
•
CPU 317TF-3PN/DP: Controlling a SINAMICS S120 with Safety Functions
Getting Started, 10/2013, A5E02982990-04
Result
The system generates the technology data
blocks DB 1 to DB 3, or DB 4.
5
79