Configuration
4.6 Downloading the hardware configuration to the target hardware
Step
Activity
5
You have now inserted your PG/PC in the Industrial Ethernet network and established the requirement to
exchange data with the SINAMICS control.
6
Complete the network configuration by calling the Network > Save and compile command.
Select "Compile and check everything" and confirm with "OK".
7
Close the output window with File > Close.
8
Close the NetPro configuration program by calling the Network > Exit command.
40
Result
CPU 317TF-3PN/DP: Controlling a SINAMICS S120 with Safety Functions
Getting Started, 10/2013, A5E02982990-04