Siemens SIMATIC S7-300 Getting Started page 28

Automation system, cpu 317tf-3pn/dp: controlling a sinamics s120 with safety functions

Hide thumbs Also See for SIMATIC S7-300:

Table of Contents

Configuration

4.3 Configuring the F-DI signal module

Step

Activity

Open the "Supply module 1VS / 3VS" folder. Assign the parameters of the channels used as shown in the

"Configuration of the input channels" table:

Keep the default settings for channels 0 and 12, 1 and 13, 2 and 14.

For the channels 3 and 15, select the value "1001(1v1) evaluation" for the "Evaluation of the sensors"

parameter.

CPU 317TF-3PN/DP: Controlling a SINAMICS S120 with Safety Functions

Getting Started, 10/2013, A5E02982990-04

Table of Contents