Downloading The Hardware Configuration To The Target Hardware - Siemens SIMATIC S7-300 Getting Started

4.6

Downloading the hardware configuration to the target hardware

Requirement
To get online access to the SINAMICS S120 drive from the programming device, you need
routing between the Ethernet interface and the PROFIBUS DP (DRIVE) by means of the
technology CPU.
Ensure that the appropriate PG/PC assignment has been made.
Basic procedure
1. If the PG/PC assignment is not available, configure this in NetPro.
2. Downloading the hardware configuration to the target hardware
CPU 317TF-3PN/DP: Controlling a SINAMICS S120 with Safety Functions
Getting Started, 10/2013, A5E02982990-04
4.6 Downloading the hardware configuration to the target hardware
Configuration
37