Product Certifications - Emerson Rosemount 148 Quick Start Manual

Quick Start Guide
5

Product certifications

Rev 0.4
5.1 European Directive information
A copy of the EU Declaration of Conformity can be found at the
end of the Quick Start Guide. The most recent revision of the EU
Declaration of Conformity can be found at Emerson.com/Rosemount.
5.2 Ordinary location certification
As standard, the transmitter has been examined and tested to
determine that the design meets the basic electrical, mechanical,
and fire protection requirements by a Nationally Recognized Test
Laboratory (NRTL), as accredited by the Federal Occupational Safety
and Health Administration (OSHA).
5.3 North America
The US National Electrical Code
Code (CEC) permit the use of Division marked equipment in Zones
and Zone marked equipment in Divisions. The markings must be
suitable for the area classification, gas, and temperature class. This
information is clearly defined in the respective codes.
5.4 USA
5.4.1 E5 USA Explosion-proof and Dust-Ignitionproof
Certificate
Standards
Markings
5.4.2 I5 USA Intrinsic Safety and Nonincendive
Certificate
Standards
Markings
16
1091070
FM Class 3600-2011, FM Class 3611-2004, FM Class
3615-2006, FM 3616-2011, UL Std. No. 60079-0: Ed.6, UL
Std. No. 50E
CL I/II/III, DIV 1, GP B, C, D, E, F, G; when installed per
Rosemount drawing 00644-1059; Type 4X; IP66/68
1091070
FM Class 3600-2011, FM Class 3610-2010, FM Class
3611-2004, UL Std. No. 60079-0: Ed.6, UL Std. No.
60079-11: Ed. 6, UL Std. No. 50E
CL I/II/III, DIV 1, GP A, B, C, D, E, F, G; NI CL1, DIV 2,
GP A, B, C, D when installed per Rosemount drawing
00148-1056; Type 4X; IP66/68
(NEC) and the Canadian Electrical
®
April 2024
Emerson.com/Rosemount