Product Certifications - Emerson Rosemount 1066 Quick Start Manual

February 2024
5

Product certifications

Rev 1.1
5.1 European Directive information
A copy of the EU Declaration of Conformity can be found at the
end of the Quick Start Guide. The most recent revision of the EU
Declaration of Conformity can be found at Emerson.com/Rosemount.
5.2 Ordinary location certification
As standard, the transmitter has been examined and tested to
determine that the design meets the basic electrical, mechanical,
and fire protection requirements by a Nationally Recognized Test
Laboratory (NRTL) as accredited by the Federal Occupational Safety
and Health Administration (OSHA).
5.3 Installing equipment in North America
The US National Electrical Code
Code (CEC) permit the use of Division marked equipment in Zones
and Zone marked equipment in Divisions. The markings must be
suitable for the area classification, gas, and temperature class. This
information is clearly defined in the respective codes.
5.4 USA
5.4.1 FM intrinsically safe
Certificate
Standards
Markings
Quick Start Guide
(NEC) and the Canadian Electrical
®
FM16US0181X
FM Class 3600:2011, FM Class 3610:2010, FM
Class 3611:2004; FM Class 3810:2005, ANSI/ISA
60079-0:2009, ANSI/ISA 60079-11:2009 ANSI/IEC
60529:2004
Listing # 1, # 2, # 3, # 4:
IS/I, II, III/1/ABCDEFG
I/0, AEx ia IIC
NI/I/2/ABCD
DIP/II,III/1/EFG
T4 Tamb = -20 °C to +65 °C
Install per control drawing 1400670
IP66
Listing #5 and #6
IS/I, II, III/1/ABCDEFG;
Quick Start Guide
35