Supported Software And Hardware Capabilities - Avaya 3600 Series Release Notes

Important notices
5. Choose option: 3 – Diagnostics.
6. Choose option: 1 — Download via TFTP.
7. Enter the filename, along with its extension; for example _diag.bin.
8. Enter the TFTP server IP address.
9. Enter the switch IP address.
10. Enter the subnet mask.
11. Enter the port in which the cable is connected.
The download of the DIAG image begins.

Supported software and hardware capabilities

The following table summarizes the known capabilities for the ERS 3600 Series software.
Table 1: Supported capabilities for the Avaya Ethernet Routing Switch 3600 Series
Feature
QoS egress queues
QoS filters per precedence
QoS precedence
Total QoS filters
MAC addresses
Layer 2
VLANs
Multiple Spanning Tree Instances (MSTI) in MSTP mode 8
Multicast entries (IPv4 and IPv6)
IGMP Snoop VLANs
LLDP Neighbors (3626/3650)
LLDP Neighbors per port
MultiLink Trunking (MLT), Link Aggregation (LAG)
groups
Links for each MLT or LAG
Layer 3
ARP entries (local, static & dynamic)
Local ARP Entries (local IP interfaces)
Static ARP entries
February 2017 Release Notes for Avaya Ethernet Routing Switch 3600 Series
Comments on this document? infodev@avaya.com
Maximum number supported
4
256
8
(4 x 256) = 1024
16000
256
248
256
416/800
16
6
4
512 (of which 32 are reserved for local ARPs)
32
256
Table continues...
24