Configuring Multiple Ports Using Edm - Example 2 - Avaya ERS 3500 Series Fundamentals

7. On the Interface tab toolbar, click Apply to apply the changes to the switch

Configuring multiple ports using EDM - Example 2

Use this procedure to configure multiple ports using the Multiple Port Configuration functions
and the Security, MAC Security, AutoLearn workflow. When you use this workflow you can
select ports directly from the Multiple Port Configuration pane on the Configuration tab.
Procedure
1. In the navigation tree, double-click Security.
2. In the Security tree, double-click MAC Security.
3. Click the AutoLearn tab.
4. In the work area, in the Make Selection section of the Multiple Port Configuration
5. In the Port Editor window, click the ports you want to configure.
6. Click OK to return to the Make Selection pane.
7. To change the configuration of the selected ports, in the Multiple Port Configuration
8. In the Make Selection pane, click Apply Selection.
9. On the AutoLearn tab toolbar, click Apply to apply the changes to the
Fundamentals of ERS 3500 Series
configuration.
pane, click the Switch/Stack/Ports ellipsis (...) to open the Port Editor dialog.
Note:
If you want to configure all ports, click All.
The ports you selected appear in the Switch/Stack/Ports box.
pane, double-click the cell beneath the column heading that represents the
parameter you want to change and do one of the following:
• Select a value from a drop-down list.
• Type a value in the cell.
The changes appear in the table.
configuration.
Configuring multiple ports using EDM - Example 2
March 2014 43