Ip Office Script - Avaya 2000 series Technical Configuration Manual

Ethernet routing switch
Table of Contents

Advertisement

8.2.1

IP Office Script

Avaya created a script (run ipoffice) that automatically provisions the switch according to Avaya best
practices for converged solutions. The configuration is optimized for solutions with IP Office supporting
~2 to 22 users.
The script supports a fully automated (default) configuration and a verbose version that prompts the user
to change the selected defaults. The non-verbose mode just executes the script with all of the pre-defined
default values and settings without the requirement of user intervention. The verbose version of the script
provides an opportunity for a user to change the defaults via prompted inputs.
The script sets the VLAN IDs, IP addresses, QoS rules, and tagging modes on switch ports
to specific values. It also sets LLDP for IP Phone detection and then prompts you to choose
specific switch ports for the IP Office (PBX) call server to connect to.
The following examples use the ERS 3500 to illustrate the script results.
8.2.1.1 Default mode results
Running the script in the default mode results in the following:
1. Set Voice VLAN ID [42]
Set IP address for VLAN 42 to 192.168.42.254 on the ERS 3500
2. Set Data VLAN ID [44]
Set IP address for VLAN 44 to 192.168.44.254 on the ERS 3500
Switch Management IP address (IP Address 192.168.44.254)
3. Set IP Office LAN port (Port 1 on switch)
4. Set Gateway modem/router port (Port 2 on switch)
5. Set Call Server - IP Office (IP address 192.168.42.1)
IP Office default DHCP pool: 192.168.42.2 – 192.168.42.201
6. Set File Server IP Address (IP address 192.168.42.1)
7. Create QoS if-group named qosTrustedIfcs with interface class of trusted and assign to all ports
8. Set all port tagging to UntagPvidOnly
Default PVID on port 1 is 42
Default PVID on all other ports is 44
Port 1 is a member of VLAN 42, port 2 is a member of VLAN 44, while all other ports are
members of both VLAN 42 and VLAN 44
9. Set LLDP MED Policy on all ports
VLAN ID = 42, tagging = tagged, DSCP = 46, Priority = 6
October 2012
Avaya Inc. – External Distribution
IP Office & Ethernet Switching Technical Configuration Guide
avaya.com
41

Advertisement

Table of Contents
loading

This manual is also suitable for:

4000 series5000 series3000 series

Table of Contents