CLUTCH MASTER CYLINDER
CLUTCH MASTER CYLINDER REMOVAL/INSTALLATION
CAUTION:
Fluid will damage painted surfaces. Be careful not to spill any on painted surfaces. If it is spilled, wipe it
•
off immediately.
1. Remove in the order indicated in the table.
2. Install in the reverse order of removal.
3. Bleed the air from the system.
4. Inspect and adjust the clutch pedal.
1 Hose clip
2 Clutch pipe
3 Nut
4 Clutch master cylinder
5 Packing
(w)
RX-8 Transmission (Manual & Auto)
Page 9