Main Menu - Drive Information - Group - Trane TR150 Programming Manual

Parameters

3.11 Main Menu - Drive Information - Group

15
Parameter group containing frequency converter
information such as operating data, hardware configu-
ration, and software versions.
3.11.1 15-0* Operating Data
15-00 Operating hours
Range: Function:
0 h [0 - 0x7fffffff. h] View how many hours the frequency
*
converter has run. The value is saved
when the frequency converter is turned
off.
15-01 Running Hours
Range: Function:
0 h [0 - View how many hours the motor has run.
*
0x7fffffff. h] Reset the counter in parameter 15-07 Reset
Running Hours Counter. The value is saved
when the frequency converter is turned off.
15-02 kWh Counter
Range: Function:
0 kWh [0 - 65535 View the output power of the frequency
*
kWh] converter in kWh as a mean value over 1
hour. Reset the counter in
parameter 15-06 Reset kWh Counter.
15-03 Power Up's
Range: Function:
0 [0 - 2147483647 ] View the number of times the frequency
*
converter has been powered up.
15-04 Over Temp's
Range: Function:
0 [0 - 65535 ] View the number of frequency converter
*
temperature faults that have occurred.
15-05 Over Volt's
Range: Function:
0 [0 - 65535 ] View the number of frequency converter
*
overvoltages that have occurred.
15-06 Reset kWh Counter
Option: Function:
NOTICE
To reset, press [OK].
[0] Do not reset
*
BAS-SVP16B-EN
Programming Guide
15-06 Reset kWh Counter
Option:
[1] Reset counter To reset the kWh counter to 0, select [1]
15-07 Reset Running Hours Counter
Option:
[0] Do not reset
*
[1] Reset counter To reset the running hours counter, select [1]
3.11.2 15-3* Alarm Log
Parameters in this group are array parameters, where up to
10 fault logs can be viewed. [0] is the most recent logged
data, and [9] the oldest. Fault codes, values, and time
stamp can be viewed for all logged data.
15-30 Alarm Log: Error Code
Range:
0 [0 - 255 ] View the fault code and look up its meaning in
*
15-31 InternalFaultReason
Range:
0 [-32767 - 32767 ] View a description of the error. This
*
3.11.3 15-4* Drive Identification
Parameters containing read-only information about the
hardware and software configuration of the frequency
converter.
15-40 FC Type
Range:
0 [0 - 6 ] View the FC type code. The readout is identical to
*
15-41 Power Section
Range:
0 [0 - 20 ] View the FC type code. The readout is identical to
*
02/2017 All rights reserved.
Function:
Reset and press [OK] (see
parameter 15-02 kWh Counter).
Function:
Reset counter and press [OK]
(parameter 15-01 Running Hours) to 0 (see
also parameter 15-01 Running Hours).
Function:
chapter 4 Troubleshooting.
Function:
parameter is used with alarm 38, Internal
Fault.
Function:
the frequency converter series power field of the
type code definition, characters 1–6.
Function:
the frequency converter series power field of the
type code definition, characters 7–10.
3 3
77