Trane TR150 Programming Manual page 29

Parameters
0-37 Display Text 1
Range:
[0 - 0 ] Use this parameter to write an individual text string
to be read via serial communication. Device ID can
be included.
3 3
Only used when running BACnet.
0-38 Display Text 2
Range:
[0 - 0 ] Use this parameter to write an individual text string
to be read via serial communication.
Only used when running BACnet.
0-39 Display Text 3
Range:
[0 - 0 ] Use this parameter to write an individual text string
to be read via serial communication.
Only used when running BACnet.
3.1.4 0-4* LCP
Enable, disable, and password protect individual keys on
the LCP.
0-40 [Hand on] Key on LCP
Option:
[0] Disabled To avoid unintended start of the frequency
[1] Enabled [Hand On] is enabled.
*
0-42 [Auto on] Key on LCP
Option:
[0] Disabled To avoid unintended start of the frequency
[1] Enabled [Auto On] is enabled.
*
0-44 [Off/Reset] Key on LCP
Option:
[0] Disabled
[1] Enabled
*
[7] Enable Reset
Only
3.1.5 0-5* Copy/Save
Copy parameter settings between set-ups and to/from the
keypad.
0-50 LCP Copy
Option:
[0] No copy
*
28
Function:
Function:
Function:
Function:
converter in local mode, select [0] Disabled.
Function:
converter from the keypad, select [0] Disabled.
Function:
Disable the off/reset key.
Enable both off and reset functions.
Enable the reset function, and disable the
off function to avoid unintended stop of
the frequency converter.
Function:
TR150 and TR170
0-50 LCP Copy
Option:
[1] All to LCP
[2] All from
LCP
[3] Size indep.
from LCP
[10] Delete LCP
copy data
0-51 Set-up Copy
Option:
[0] No copy
*
[1] Copy from
setup 1
[2] Copy from
setup 2
[9] Copy from
Factory setup
3.1.6 0-6* Password
0-60 Main Menu Password
Range:
0 [0 - 999 ] Define the password for access to the Main Menu
*
0-61 Access to Main Menu w/o Password
Option:
[0] Full access
*
[1] LCP: Read only Prevent unauthorized editing of Main Menu
[2] LCP: No access Prevent unauthorized viewing and editing
02/2017 All rights reserved.
Function:
Copies all parameters in all set-ups from the
frequency converter memory to the LCP
memory. For service purposes, copy all
parameters to the LCP after commissioning.
Copies all parameters in all set-ups from the
LCP memory to the frequency converter
memory.
Copies only the parameters that are
independent of the motor size. The latter
selection can be used to program several
frequency converters with the same function
without disturbing motor data that is already
set.
Delete copied parameters in LCP. This function
needs that LCP version is great than or equal
to V11.00.
Function:
No function.
Copy from set-up 1 to set-up 2.
Copy from set-up 2 to set-up 1.
Copy factory setting to programming set-
up (selected in parameter 0-11 Programming
Set-up).
Function:
via the [Main Menu] key. Setting the value to 0
disables the password function. This parameter
hides after a password is defined.
Function:
Disable the password defined in
parameter 0-60 Main Menu Password.
parameters.
of Main Menu parameters.
BAS-SVP16B-EN