Trane TR150 Programming Manual page 67

Parameters
13-01 Start Event
Option:
[26] Logic rule 0
[27] Logic rule 1
3 3
[28] Logic rule 2
[29] Logic rule 3
[33] Digital input
DI18
[34] Digital input
DI19
[35] Digital input
DI27
[36] Digital input
DI29
[39] Start
command
*
[40] Drive stopped
[42] Auto Reset
Trip
[50] Comparator 4
[51] Comparator 5
[60] Logic rule 4
[61] Logic rule 5
[83] Broken Belt
13-02 Stop Event
Option:
[0] False
[1] True
[2] Running
66
TR150 and TR170
Function:
Use the result of logic rule 0 in the logic
rule.
Use the result of logic rule 1 in the logic
rule.
Use the result of logic rule 2 in the logic
rule.
Use the result of logic rule 3 in the logic
rule.
Use the value of DI18 in the logic rule
(High = true).
Use the value of DI19 in the logic rule
(High = true).
Use the value of DI27 in the logic rule
(High = true).
Use the value of DI29 in the logic rule
(High = true).
This event is true if the frequency
converter is started (either via digital
input, fieldbus, or other).
This event is true if the frequency
converter is stopped or coasted (either via
digital input, fieldbus, or other).
This event is true if the frequency
converter is tripped (but not trip-locked)
and an automatic reset is issued.
Use the result of comparator 4 in the logic
rule.
Use the result of comparator 5 in the logic
rule.
Use the result of logic rule 4 in the logic
rule.
Use the result of logic rule 5 in the logic
rule.
A broken-belt condition is detected.
Enable this function in
parameter 22-60 Broken Belt Function.
Function:
Select the condition (true or false) which
deactivates the smart logic controller.
Enters the fixed value of false in the logic
rule.
Enters the fixed value true in the logic
rule.
See parameter 13-01 Start Event for further
description.
02/2017 All rights reserved.
13-02 Stop Event
Option: Function:
[3] In range See parameter 13-01 Start Event for further
description.
[4] On reference See parameter 13-01 Start Event for further
description.
[7] Out of current See parameter 13-01 Start Event for further
range description.
[8] Below I low See parameter 13-01 Start Event for further
description.
[9] Above I high See parameter 13-01 Start Event for further
description.
[16] Thermal See parameter 13-01 Start Event for further
warning description.
[17] Mains out of See parameter 13-01 Start Event for further
range description.
[18] Reversing See parameter 13-01 Start Event for further
description.
[19] Warning See parameter 13-01 Start Event for further
description.
[20] Alarm (trip) See parameter 13-01 Start Event for further
description.
[21] Alarm (trip See parameter 13-01 Start Event for further
lock) description.
[22] Comparator 0 Use the result of comparator 0 in the
logic rule.
[23] Comparator 1 Use the result of comparator 1 in the
logic rule.
[24] Comparator 2 Use the result of comparator 2 in the
logic rule.
[25] Comparator 3 Use the result of comparator 3 in the
logic rule.
[26] Logic rule 0 Use the result of logic rule 0 in the logic
rule.
[27] Logic rule 1 Use the result of logic rule 1 in the logic
rule.
[28] Logic rule 2 Use the result of logic rule 2 in the logic
rule.
[29] Logic rule 3 Use the result of logic rule 3 in the logic
rule.
[30] SL Time-out 0 Use the result of timer 0 in the logic rule.
[31] SL Time-out 1 Use the result of timer 1 in the logic rule.
[32] SL Time-out 2 Use the result of timer 2 in the logic rule.
[33] Digital input Use the value of DI18 in the logic rule
DI18 (High = true).
[34] Digital input Use the value of DI19 in the logic rule
DI19 (High = true).
BAS-SVP16B-EN