Trane TR150 Programming Manual page 28

Parameters
Illustration 3.1 Custom Readout
The relation depends on the type of unit selected in
parameter 0-30 Custom Readout Unit:
Unit type
Dimensionless
Speed
Flow, volume
Flow, mass
Velocity
Length
Temperature
Pressure
Power
Table 3.1 Speed Relation
0-30 Custom Readout Unit
Option: Function:
Program a value to be shown in the
display of the keypad. The value has a
linear, squared, or cubed relation to speed.
This relation depends on the unit selected
(see Table 3.1). The actual calculated value
can be read in parameter 16-09 Custom
Readout.
[0] None
[1] %
*
[5] PPM
[10] l/Min
[11] RPM
[12] Pulse/s
[20] l/s
[21] l/min
[22] l/h
[23] m3/s
[24] m3/min
[25] m3/h
BAS-SVP16B-EN
Programming Guide
Speed relation
Linear
Quadratic
Cubic
02/2017 All rights reserved.
0-30 Custom Readout Unit
Option: Function:
[30] kg/s
[31] kg/min
[32] kg/h
[33] t/min
[34] t/h
[40] m/s
[41] m/min
[45] m
[60] Degree Celsius
[70] mbar
[71] bar
[72] Pa
[73] kPa
[74] m Wg
[80] kW
[120] GPM
[121] gal/s
[122] gal/min
[123] gal/h
[124] CFM
[127] ft3/h
[140] ft/s
[141] ft/min
[160] Degree Fahr
[170] psi
[171] lb/in2
[172] in WG
[173] ft WG
[180] hp
0-31 Custom Readout Min Value
Range:
0 CustomRea- [ 0 -
doutUnit 999999.99
*
CustomRea-
doutUnit]
0-32 Custom Readout Max Value
Range:
100 Custom- [ 0.0 -
ReadoutUnit 999999.99
*
CustomRea-
doutUnit]
Function:
This parameter sets the
minimum value of the custom-
defined readout (occurs at 0
speed). It is only possible to
select a value different from 0
when selecting a linear unit in
parameter 0-30 Custom Readout
Unit. For quadratic and cubic
units, the minimum value is 0.
Function:
This parameter sets the
maximum value to be shown
when the speed of the motor
has reached the set value for
parameter 4-14 Motor Speed
High Limit [Hz].
27
3 3