USER DATA
SYSTEM PASSWORD
7. Press STOP to exit from the menu.
SENDER'S NAME
1. Press FUNCTION followed by 5.
FUNCTION
5. SET-UP
2. Press START.
5. SET-UP
USER DATA
3. Press the ↓ ↓ ↓ ↓ ↓ key twice.
5. SET-UP
INSTALLATION PARAMETERS
4. Press START. The display shows the first installation parameter.
INSTALLATION PARAMETERS
SENDER'S NAME
5. Press START again.
SENDER'S NAME
_
On the right-hand side of the display, you can view all the characters in the "Character Set
Table" by pressing the ↑ ↑ ↑ ↑ ↑ and ↓ ↓ ↓ ↓ ↓ keys. When the character required appears, press the
CONFIRM key to insert it in the sender's name. A space can be entered by pressing the → → → → →
key. If you make a mistake, move to the incorrect character using the ← ← ← ← ← key and type the
correct character. To clear the entire name and type it again, press the CLEAR key.
SENDER'S NAME
TECNOTEAM_
6. Having entered your name, press START to confirm. Press STOP to terminate the procedure
or follow the "Setting the Installation Parameters" procedure starting from step 6.
[0-9]
A
M
11