Wiring Components - Siemens SIMATIC Vision Sensor VS 130-2 Manual

3.2

Wiring Components

Connect the processing unit with the other components using the connectors on
the front panel.
Port Pin Assignment of the Processing Unit
Attention
!
Do not connect or disconnect cables when the power supply is on.
Apart from the Ethernet cable, the cables are supplied with the product (See
Components of the Product).
Warning
!
Grounding the VS 130-2/VS 130-2vcr cancels the ungrounded installation of the
power unit used to operate the VS 130-2/VS 130-2vcr.
Connector
Functional earth
Power supply
Illumination Unit
Sensor head
(shielded cable)
I/O
PROFIBUS DP
Ethernet
* The supplied ferrite ring must be fixed to the sensor cable (approx. 50 mm from connector to
evaluation unit).
Vision Sensor SIMATIC VS 130-2/VS 130-2vcr
A5E00475759-01
Connector Type
Label
- Screw terminal
IN 24 V DC Circular connector M12
LAMP Circular connector M12
SENSOR HD D-sub *
DI/DO D-sub
DP D-sub
Ethernet RJ45
Number Cable Cross
of pins Section
- -
2
4 0.56 mm
2
4 0.23 mm
2
26 0.09 mm
2
15 0.14 mm
9 -
8 -
Installation
Type
-
Pin
Socket
Socket
Socket
Socket
Socket
3-3