Selecting The Mode - Siemens SIMATIC Vision Sensor VS 130-2 Manual

6.4.2

Selecting the Mode

You can use the following modes:
•
Select Code
•
Train Code
•
Start Processing
You will find a description of the modes in Working with the Processing Unit.
Select Code
To select a code, apply the appropriate bit pattern to the inputs SEL0 to SEL3. You
can select codes 1 to 15. If you select code 0, the last selected code is retained.
Vision Sensor SIMATIC VS 130-2/VS 130-2vcr
A5E00475759-01
Process Interface
6-7